re: (rF) Cut track warning

When using the ISI AIW editor, the cut track warning numbers are automatically generated.
In some cases the cut track warning though is not correct, or slightly too narrow.
Anyone know how to edit (manually? or otherwise) the cut track warning without causing further AIW issues?

J. Burroughs had the answer to my question:

//////////
Sure, easy to fix...

drive the car and choose "Unsupported options" , then click "Turn off Quick keys" I do this every time I re-enter the track.... that way using the keyboard does not start turning features on and off...

then go "back" to the main editor options and choose "show hide menu"

click "show cut track"

Drive to the area you want to change...

The cut track areas will be defined with the yellow lines across the track and going thru a waypoint green cross.

"Box" or "highlight" the waypoint (turning it from green to red), meaning you use the left mouse to highlight the waypoint by boxing it in with the mouse... note that you can choose more than one waypoint at a time...

Once done...

Hold down the control key and then use the up and down arrows to move the left side, and control key and left and right arrows to change the right side of the cut track.

Then unselect all when you are done...

Go back to unsupported options and choose ReCalculate Groove on Save... this will make the alpha groove show back up,

now save, and it's fixed.....


Glad to help...

//////////